The battery is a crucial component of your Mac, and if it’s not working properly, you’ll be limited to using your MacBook only where the power cord can reach. This can be quite inconvenient if you’re not at home or in the office. Even the best MacBooks and Macs are designed to last for many years, but eventually, you’ll likely need to replace the internal battery. Apple’s MacBook series batteries have a limited number of cycles they can go through, and after that, you’ll probably notice a significant decrease in performance. This issue applies whether you stick with Apple or switch to the best Windows laptop. Either way, it’s important to know how to check your battery’s health. If you find that your battery is nearing the end of its life, you can decide whether to continue using your laptop with the power cord only or purchase a new battery from Apple. In the following steps, we’ll guide you on how to check the health of your MacBook’s battery so that you know where things stand. And if you want to learn more about how to get the most out of your Mac, take a look at our guide to the best Mac tips, tricks, and timesavers.
What is a Mac Battery Cycle?
Battery Cycle Count refers to the number of times your MacBook’s battery goes through a full charge and discharge cycle. This happens when the battery is completely drained and then recharged. However, it’s important to note that not every battery usage session counts as a full cycle.
Batteries have a limited number of cycles they can go through before their performance starts to decline. Once you reach the maximum cycle count for your battery, it’s a good idea to think about getting a replacement.
For most modern MacBooks, the maximum number of cycles is around 1000 means that, on average, the battery in a MacBook is designed to maintain its optimal performance for approximately 1000 times of fully charging it and then using up that charge. After reaching this point, the battery’s performance may gradually decrease, and it may not hold its charge as well as it did when it was new. This doesn’t mean that the battery will stop working altogether after 1000 cycles, but you may notice a decrease in its overall capacity and how long it lasts before needing to be recharged.
Even though your battery might still work after reaching the maximum cycle count, you’ll experience the best performance with a new battery. Checking the cycle count on your MacBook can help you determine if it’s getting close to the point where you should consider replacing the battery.
Now, how can you find out the number of cycles your battery has gone through?
How to Check MacBook Battery Cycles ?
Here’s a simple way to check your battery cycle count:
- Start by clicking on the Apple Icon in the top-left corner of your screen and selecting “About this Mac.”
- You’ll see a window with an overview of your system. Click on “System Report” to access more detailed information.
- A new window will open, showing various details about your Mac. Look for the “Power” option on the left side and click on it.
- This will take you to the Battery Information screen, where you can find your battery cycle count along with other details like capacity.
By following these steps, you can easily check your battery cycle count and get information about your battery’s performance.
How Long Does a MacBook Battery Last in Terms of Cycles?
The maximum number of cycles a MacBook battery can handle depends on its age. Older MacBooks can go through about 300 to 500 cycles before their performance starts to decline. On the other hand, newer MacBooks, especially those made in the last 10 years, can handle closer to 1000 cycles.
Even if a MacBook’s battery continues to work after reaching its maximum cycle count, it won’t hold as much charge as before. Additionally, some older MacBook batteries may swell and expand, potentially causing damage to the computer.
To keep your MacBook in good health and ensure the longest battery life, it’s recommended to replace the battery before it reaches its maximum cycle count. By doing so, you can maintain optimal performance and avoid potential issues.
How to Check Battery Health on MacBook
In macOS Ventura
Checking your Mac’s battery health in macOS Ventura is easy. It’s similar to checking it on an iPhone, and you can do it through the System Settings app. Here’s how:
- Open System Settings from the Dock or the menu bar (click on the Apple menu and select “System Settings”).
- Scroll down and click on “Battery” in the left sidebar.
- In the window that appears, you’ll see “Battery Health” listed. If it says “Normal,” your MacBook’s battery is working fine. But if it says “Service Recommended,” it means you should get your MacBook’s battery replaced.
- You can also click on the info (i) button for more details. This will show you the battery’s maximum capacity as a percentage and let you enable “Optimized Battery Charging.” It’s a good idea to turn this feature on because constantly keeping your MacBook plugged in can be bad for the battery.
In addition to checking the battery health, it’s also a good practice to keep an eye on your MacBook’s battery cycle count. This count tells you how much the battery has aged and helps you understand your charging habits.
In macOS Monterey and Older Versions
Checking the battery health in macOS Monterey and older versions is a bit different because the System Preferences panel has changed. Here’s how you can do it:
- Open System Preferences from the Dock or the menu bar (click on the Apple menu and select “System Preferences”).
- Click on “Battery,” and then click on “Battery” again.
- In the bottom-right corner, click on “Battery Health.”
- Now, you’ll see the condition of your MacBook’s battery in the window. If you’re using an older version like macOS Catalina, there’s a quicker way to check. Simply click and hold the battery icon in the menu bar, and your battery’s condition will be displayed below.
By following these steps, you can easily check the health of your MacBook’s battery and assess its condition.
What is the Recommended Battery Health Percentage?
Batteries in electronic devices, including MacBooks, naturally lose their ability to hold a full charge over time. As they age, their maximum capacity decreases, which can result in shorter battery life. So, what is the ideal battery health percentage for your MacBook?
Ideally, you’ll want your battery to maintain at least 80% of its original capacity. If the maximum capacity falls below 80%, you’ll notice a significant decrease in battery life when using your MacBook. In such cases, it’s advisable to consider getting your battery serviced or replaced. Also read How to Recover Deleted Files on Mac.
Under normal usage, you can expect your MacBook’s maximum capacity to reduce by around 10% each year. However, you can slow down this degradation rate by practicing good charging habits.
I hope this guide has been helpful in teaching you how to check battery health on MacBook. If you have any further questions or need tutorials for iPhones, Androids, or more Mac-related topics, please leave a comment. We value your feedback as it helps us improve our future articles. Also, don’t forget to subscribe to our daily newsletter to stay informed about the latest news and updates regarding social media, apps, and devices.
We are sorry that this post was not useful for you!
Let us improve this post!
Tell us how we can improve this post?