Home 9 Apps & Devices 9 How to Put iPhone in DFU Mode | All Models

How to Put iPhone in DFU Mode | All Models

by | Jan 29, 2024

If you’re facing issues with your iPhone and need to perform advanced troubleshooting or restore your device, putting it in DFU (Device Firmware Update) mode can be a helpful solution. DFU mode allows you to access the device’s firmware directly and perform actions like downgrading firmware, fixing software glitches, or restoring the device to factory settings. In this article, we will show you how to put iPhone in DFU mode, and provide you with  step-by-step instructions for various iPhone models. Whether you’re experiencing software problems or need to initiate a specific action, understanding how to enter DFU mode can be a valuable skill for iPhone users.

What Is DFU Mode?

DFU (Device Firmware Update) mode is a special state that allows you to interact with the firmware of your iPhone, iPad, or iPod touch. It is a low-level mode that enables you to perform advanced actions like restoring the device to factory settings, downgrading firmware versions, or fixing software issues that are not solvable through regular troubleshooting methods.

Unlike recovery mode, which is commonly used for restoring devices, DFU mode provides even deeper access to the device’s firmware. In DFU mode, the device bypasses the bootloader and does not load the operating system or boot into normal mode. This allows you to make changes to the firmware without interference.

Entering DFU mode involves a specific sequence of button presses and timing, which varies depending on the iPhone model. Once in DFU mode, you can connect your device to a computer and use iTunes or other software to perform firmware-related tasks.

It’s important to note that entering DFU mode should be done carefully and with caution, as incorrect procedures or interruptions during the process can lead to potential issues or data loss. It is recommended to follow official instructions or seek guidance from reliable sources when attempting to enter DFU mode on your device.

How to Put iPhone in DFU Mode

iPhone 6 or Earlier

If you have an iPhone 6 or an older model, there’s a chance you might encounter software or firmware issues. To put your device into DFU mode, follow these steps carefully:

See also  How to Get More Followers on Pinterest: A Comprehensive Guide
Put iPhone in DFU Mode iPhone 6 or Earlier
  1. Connect your iPhone 6 to a Windows or Mac computer using a USB cable.
  2. Open the Finder or iTunes application on your computer.
  3. On your iPhone, press and hold the power button and the home button together for about 10 seconds.
  4. After 10 seconds, release the power button, but keep holding the home button.
  5. When you see a notification on Finder or iTunes that your device is in recovery mode, you can release the home button.
  6. Click on the restore option in Finder or iTunes to update to a new version of iOS. Also read iOS 17 Hidden Features You Should Try Right Now.

By following these steps, you can put your iPhone 6 or older model into DFU mode and perform necessary software updates or troubleshooting.

iPhone 7

To put your iPhone 7 into DFU mode, you can follow these similar steps to the iPhone 6, with a few small changes. It’s important to follow them carefully:

Put iPhone in DFU Mode iPhone 7
  1. Connect your iPhone 7 to a Windows or Mac computer using a USB cable.
  2. Open the Finder or iTunes application on your computer.
  3. On your iPhone, press and hold both the volume down button and the power button at the same time for about 10 seconds.
  4. While still holding the volume down button, release only the power button.
  5. When you see a message from iTunes or Finder saying that your iPhone is in recovery mode, you can let go of the volume down button.
  6. Click on the option to restore your iPhone and install a new operating system.
  7. Make sure your screen stays black during this process. If it doesn’t, you may need to repeat these steps.

By following these instructions carefully, you can put your iPhone 7 into DFU mode and perform any necessary updates or troubleshooting.

iPhone 8

If you have an iPhone 8 and want to enter DFU mode, here are the steps. They are a bit more detailed than the previous ones, so make sure to follow them carefully:

  1. Connect your iPhone 8 to a Windows or Mac computer using a USB cable.
  2. Open the Finder or iTunes application on your computer.
  3. On your iPhone, quickly press and let go of the volume up button.
  4. Quickly press and let go of the volume down button.
  5. Press and hold down the power button until the screen turns black.
  6. Keep holding the power button and then press the volume down button for a few seconds.
  7. Release the power button, but keep holding the volume down button.
  8. When you see a message from iTunes or Finder saying that your iPhone 8 is in recovery mode, you can let go of the volume down button.
  9. Click on the option to restore your iPhone 8 and install a new operating system.
See also  How To Create Your Persona Or 3D Avatar On Apple Vision Pro

By following these instructions carefully, you can put your iPhone 8 into DFU mode and perform any necessary updates or troubleshooting.

iPhone XR, 11, 12 and 13

If you have an iPhone XR, 11, 12, or 13, entering DFU mode is a bit different because these models use Face ID instead of a home button with a fingerprint feature. Here are the steps to enter DFU mode on these models, including the mini, Pro, and Pro Max versions. There are two different methods you can try:

Put iPhone in DFU Mode iPhone XR, 11, 12 and 13

Method 1:

  1. Connect your iPhone 11 to a Mac computer.
  2. Open iTunes and look for your iPhone in the list of devices.
  3. Turn off your device.
  4. Press and hold the home button and the lock button together for 10 seconds.
  5. Release only the lock button.
  6. Keep holding the home button until iTunes shows a message that your device is in recovery mode.

If the first method doesn’t work, you can try an alternate way:

Method 2:

  1. Make sure your iPhone 11 is turned on.
  2. Launch iTunes on your Mac.
  3. Press the volume up button and quickly press the volume down button.
  4. Hold down the power button until your phone screen goes black.
  5. Keep holding the power button and also hold the volume down button for about five seconds.
  6. Release the power button.
  7. Continue pressing the volume down button and wait a few more seconds. The screen should stay black.
  8. Release the button once iTunes notifies you that DFU mode is enabled.

One important tip to remember is that during the process, you should not see the Apple logo, and your iPhone should not restart. If either of these things happens, it means you may have followed the steps incorrectly, and you’ll need to start over before restoring your device.

How to Put iPhone 15 or iPhone 15 Pro in DFU Mode

To put your iPhone 15, iPhone 15 Pro, iPhone 15 Pro Max, or iPhone 15 Plus into DFU mode, you can follow these steps:

See also  Best Budgeting Apps for Couples | 2024
Put iPhone in DFU Mode iPhone 15
  1. Connect your iPhone 15 to a computer using a USB-C cable.
  2. Press and release the Volume Up button on your iPhone.
  3. Press and release the Volume Down button on your iPhone.
  4. Press and hold the Side button for about 10 seconds until the screen goes black.
  5. While still holding the Side button, press and hold the Volume Down button for an additional 5 seconds.
  6. Release the Side button but continue holding the Volume Down button for another 10 seconds. The screen should remain black throughout this time.

Now your iPhone is in DFU mode. You should see a black screen indicating that the device is in DFU mode. If you see the Apple logo or any other screen, it means you did not enter DFU mode correctly and should repeat these steps.

Once your device is in DFU mode, you can use iTunes or Finder to perform a clean installation of iOS on your iPhone 15. To put iPhone 14 or iPhone 14 Pro in DFU Mode, you should follow the same steps.

How to Get Out of DFU Mode?

After you’ve completed your update, it’s important to know how to return your phone to its normal working state. Exiting DFU mode is slightly different depending on your iPhone model. Here are the steps to exit DFU mode on different iPhone models:

  • For iPhone 6 or earlier: Press and hold both the home button and power button together until you see the Apple logo on your screen.
  • For iPhone 7: Press and hold both the power button and volume down button until you see the Apple logo on your screen.
  • For iPhone 8, XR, 11, 12, 13, 14, and 15: Press and release the volume up button, then immediately press and release the volume down button. After that, hold down the power button until you see the Apple logo on your screen.

Conclusion

By understanding how to put your iPhone in DFU mode, you can have a useful tool at your disposal for troubleshooting and resolving software-related problems on your device. If you found this guide useful, make sure to share it with others. If you have any questions about this guide, feel free to leave a comment below and let us know.

How useful was this post?

Click on a star to rate it!

Average rating 5 / 5. Vote count: 2

No votes so far! Be the first to rate this post.

We are sorry that this post was not useful for you!

Let us improve this post!

Tell us how we can improve this post?

You May Also Like…

0 Comments

Submit a Comment

Your email address will not be published. Required fields are marked *